![]() |
|
Register |
FAQ |
|
|
#1
|
|||
|
|||
|
What sort rpm-s car should do when driving 60 mph. Or even better if you can tell 3rd and 4th gear rpm-s.
My tacho doesn't work always, usually when starting up, it might take couple of minutes till it awakes. Any ideas? And third is car has died suddenly(only 3 times in a month), when stationary in traffic and in D or 2. Restarts without problem. And revs are going up and down when engine has warmed up, I read about it from v8sho, but can someone tell me what's the fix. |
|
#2
|
||||
|
||||
|
Maybe the idle air controller
__________________
97 Ebony Satin/Gray -Welded 94 Rare Green/Gray MTX not sold 91 White/Black "Formerly a James Car" 68 Chevy C-20 Orange Crate in Restoration |
|
#3
|
||||
|
||||
|
__________________
|
|
#4
|
|||
|
|||
|
How can I check codes, did some searching but no luck.
|
|
#5
|
||||
|
||||
|
I know that in third gear rpms are around 3300
|
|
#6
|
||||
|
||||
|
Go to AutoZone and ask them to read them for you...its free.
|
|
#7
|
||||
|
||||
|
Not sure how many AutoZones they have in the UK...
|
|
#8
|
|||
|
|||
|
I'm trying to figure out how my sho gearbox works, it is bit struggling with gear changes when on d, but when on 2, it seems to work fine through all gears?. When I'm doing ~56-60 mph, revs are at 2000 or just over it. So that should be 4th gear then.
|
|
#9
|
||||
|
||||
|
yup, overdrive
|
|
#10
|
|||
|
|||
|
With the TC locked up.
pax, smn
__________________
'98, Black Cold air intake, K&N panel, SARC switch, 4 gauge instrumentation cluster, Front Strut Brace, ASFB, Eibach springs, 23mm rear sway bar, Yokohama Advan S.4. tires, wired open secondaries, FPS trans cooler, Magnaflow 99000 cats, Flowmaster 40 mufflers, and welded cam sprockets. Complete body restoration in 2010. New DD: '11 metallic blue Porsche C4S. |
![]() |
| Thread Tools | |
|
|
If you wish to help keep SHOforum running please click the donation button below
![]() |
![]() |